| 2016-07 |
The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel |
ACTA MATERIALIA
|
| 2016-07 |
Kinetic control of nanocrack formation in a palladium thin film on an elastomeric substrate for hydrogen gas sensing in air |
SENSORS AND ACTUATORS B-CHEMICAL
|
| 2016-05 |
The effect of Zn coating layers on the hydrogen embrittlement of hot-dip galvanized twinning-induced plasticity steel |
CORROSION SCIENCE
|
| 2016-03 |
Critical assessment 19: stacking fault energies of austenitic steels |
MATERIALS SCIENCE AND TECHNOLOGY
|
| 2016-01 |
The effects of grain size on yielding, strain hardening, and mechanical twinning in Fe?18Mn?0.6C?1.5Al twinning-induced plasticity steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2016-01 |
Room-Temperature Solid Solution Softening in Fe-V Binary System |
METALS AND MATERIALS INTERNATIONAL
|
| 2016-01 |
The effect of Si on hydrogen embrittlement of Fe-18Mn-0.6C-xSi twinning-induced plasticity steels |
ACTA MATERIALIA
|
| 2015-11 |
Precipitation and dissolution behavior of k-carbide during continuous heating in Fe-9.3Mn-5.6Al-0.16C lightweight steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2015-11 |
Effects of MC-Type carbide forming and graphitizing elements on thermal fatigue behavior of indefinite chilled cast iron rolls |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2015-10 |
저합금강 기어의 침탄 및 소입 공정에 대한 전산모사 |
열처리공학회지
|
| 2015-10 |
A microstructural investigation on deformation mechanisms of Fe-18Cr-12Mn-0.05C metastable austenitic steels containing different amounts of nitrogen |
MATERIALS & DESIGN
|
| 2015-07 |
Wear behavior of AISI D2 steel by enhanced ion nitriding with atomic attrition |
TRIBOLOGY INTERNATIONAL
|
| 2015-05 |
The size effect of initial martensite constituents on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2015-04 |
Current opinion in medium manganese steel |
MATERIALS SCIENCE AND TECHNOLOGY
|
| 2015-04 |
In situ observations of transgranular crack propagation in high-manganese steel |
SCRIPTA MATERIALIA
|
| 2015-04 |
Schaeffler diagram for high Mn steels |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2015-04 |
The advantage of grain refinement in the hydrogen embrittlement of Fe-18Mn-0.6C twinning-induced plasticity steel |
CORROSION SCIENCE
|
| 2015-04 |
Relationship between grain size and ductile-brittle transition at room temperature in Fe-18Mn-0.6C-1.5Si twinning-induced plasticity steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2015-04 |
The effects of annealing temperature and cooling rate on carbide precipitation behavior in H13 hot-work tool steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2015-03 |
Abnormal expansion during the ferro- to para-magnetic transition in pure iron |
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
|
| 2015-02 |
Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite |
ACTA MATERIALIA
|
| 2015-01 |
Pitting corrosion behavior in advanced high strength steels |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2014-12 |
Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2014-12 |
Improved mechanical properties of Mg-7.6Al-0.4Zn alloy through aging prior to extrusion |
SCRIPTA MATERIALIA
|
| 2014-12 |
The effect of Ti precipitates on hydrogen embrittlement of Fe-18Mn-0.6C-2Al-xTi twinning-induced plasticity steel |
CORROSION SCIENCE
|
| 2014-12 |
The effect of nitrogen on the stacking fault energy in Fe-15Mn-2Cr-0.6C-xN twinning-induced plasticity steels |
SCRIPTA MATERIALIA
|
| 2014-12 |
Elastic strain energy induced by epsilon martensitic transformation and its contribution to the stacking-fault energy of austenite in Fe-15Mn-xC alloys |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2014-11 |
High-temperature tensile and creep deformation of cross-weld specimens of weld joint between T92 martensitic and Super304H austenitic steels |
MATERIALS CHARACTERIZATION
|
| 2014-11 |
Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy |
MATERIALS & DESIGN
|
| 2014-10 |
Small-angle neutron scattering analysis of Mn-C clusters in high-manganese 18Mn-0.6C steel |
MATERIALS CHARACTERIZATION
|
| 2014-10 |
The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel |
ACTA MATERIALIA
|
| 2014-10 |
The effects of vanadium on the microstructure and wear resistance of centrifugally cast Ni-hard rolls |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2014-09 |
The Solidification Mode of Fe-Mn-Al-C Lightweight Steel |
JOM
|
| 2014-09 |
Influence of precooling and deformation temperature on microstructure and mechanical properties in a high-manganese austenitic steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2014-08 |
Variation of carbon concentration in proeutectoid ferrite during austenitization in hypoeutectoid steel |
MATERIALS CHARACTERIZATION
|
| 2014-07 |
Enhanced mechanical properties in a high-manganese austenitic steel through formation of nano grains, nanotwinned austenite grains, nano carbides and TRIP |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2014-07 |
Enhanced surface hardening of AISI D2 steel by atomic attrition during ion nitriding |
SURFACE & COATINGS TECHNOLOGY
|
| 2014-07 |
Experimental measurement of Young's modulus from a single crystalline cementite |
SCRIPTA MATERIALIA
|
| 2014-06 |
Drawing Circuits with Carbon Nanotubes: Scratch-Induced Graphoepitaxial Growth of Carbon Nanotubes on Amorphous Silicon Oxide Substrates |
SCIENTIFIC REPORTS
|
| 2014-06 |
The Effect of Pre-Strain on the Resistance to Hydrogen Embrittlement in 316L Austenitic Stainless Steel |
MATERIALS TRANSACTIONS
|
| 2014-06 |
Effect of Cu on the Precipitation of Deleterious Phases and the Mechanical Properties of 27Cr-7Ni Hyper Duplex Stainless Steels |
MATERIALS TRANSACTIONS
|
| 2014-06 |
The effect of pre-strain on hydrogen embrittlement in 310S stainless steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2014-04 |
The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels |
ACTA MATERIALIA
|
| 2014-03 |
Precipitation behaviors of carbides and Cu during continuous heating for tempering in Cu-bearing medium C martensitic steel |
JOURNAL OF MATERIALS SCIENCE
|
| 2014-01 |
준정적 변형률속도에서 저망간 쌍정유기소성강의 기계적 특성에 미치는 변형쌍정의 영향 |
KOREAN JOURNAL OF METALS AND MATERIALS
|
| 2014-01 |
The effects of multi-cyclic thermo-mechanical treatment on the grain refinement and tensile properties of a metastable austenitic steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2013-11 |
페라이트 내에 고용된 미량의 탄소가 오스테나이트화 거동 및페라이트와 오스테나이트의 열팽창 계수에 미치는 영향 |
열처리공학회지
|
| 2013-11 |
The kinetics of Nb(C,N) precipitation during the isothermal austenite to ferrite transformation in a low-carbon Nb-microalloyed steel |
ACTA MATERIALIA
|
| 2013-10 |
Surface hardening of shot peened H13 steel by enhanced nitrogen diffusion |
Surface & Coatings Technology
|
| 2013-10 |
The effects of N on the microstructures and tensile properties of Fe-15Mn-0.6C-2Cr-xN twinning-induced plasticity steels |
ACTA MATERIALIA
|
| 2013-10 |
Isothermal precipitation behavior of kappa-carbide in the Fe-9Mn-6Al-0.15C lightweight steel with a multiphase microstructure |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2013-09 |
Quantitative evaluation of dynamic precipitation kinetics in a complex Nb-Ti-V microalloyed steel using electrical resistivity measurements |
Metals and Materials International
|
| 2013-05 |
The effects of Si on the mechanical twinning and strain hardening of Fe-18Mn-0.6C twinning-induced plasticity steel |
ACTA MATERIALIA
|
| 2013-03 |
균질화, 열간단조, 어닐링 조건이 개량된 STD61 열간 금형강의 미세조직과 경도에 미치는 영향 |
열처리공학회지
|
| 2013-03 |
V, Nb 첨가 고강도 대형 H 형강의 부위별 미세조직과 경도 분포 |
열처리공학회지
|
| 2013-03 |
Quantitative analyses of dissolution and precipitation kinetics of theta-Al2Cu phase in an Al-6.2Si-2.9Cu alloy using electrical resistivity |
Metals and Materials International
|
| 2013-03 |
Evaluations of stress-free lattice spacings and residual stresses in a quenched carbon steel cylinder using neutron diffraction |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2013-03 |
Cu precipitation kinetics during martensite tempering in a medium C steel |
JOURNAL OF ALLOYS AND COMPOUNDS
|
| 2013-01 |
감성소재용 금속재료 |
재료마당
|
| 2012-11 |
Effects of Niobium on Mechanical Twinning and Tensile Properties of a High Mn Twinning-Induced Plasticity Steel |
MATERIALS TRANSACTIONS
|
| 2012-11 |
Microstructural Evolution during Austenitization and Quenching of a 5% Cr Work Roll |
MATERIALS TRANSACTIONS
|
| 2012-10 |
자동차용 열간금형강의 소재 제조기술 |
재료마당
|
| 2012-10 |
The austenite/ε martensite interface: A first-principles investigation of the fcc Fe(1 1 1)/hcp Fe(0 0 0 1) system |
APPLIED SURFACE SCIENCE
|
| 2012-06 |
Neel Temperature of High Mn Austenitic Steels |
Metals and Materials International
|
| 2012-06 |
The mechanism of enhanced resistance to the hydrogen delayed fracture in Al-added Fe-18Mn-0.6C twinning-induced plasticity steels |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
|
| 2012-06 |
Neutron diffraction analysis of stacking fault energy in Fe-18Mn-2Al-0.6C twinning-induced plasticity steels |
MATERIALS LETTERS
|
| 2012-06 |
Microstructural evolution during plastic deformation of twinning-induced plasticity steels |
SCRIPTA MATERIALIA
|
| 2012-05 |
Surface hardening of aluminum alloy by shot peening treatment with Zn based ball |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2012-04 |
Editorial |
STEEL RESEARCH INTERNATIONAL
|
| 2012-04 |
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations |
SCRIPTA MATERIALIA
|
| 2012-02 |
Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel |
ACTA MATERIALIA
|
| 2012-01 |
Orientation-dependent indentation modulus and yielding in a high Mn twinning-induced plasticity steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2012-01 |
Role of e{open} martensite in tensile properties and hydrogen degradation of high-Mn steels |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2012-01 |
Effects of B on microstructure and hardenability of resistance seam welded HSLA linepipe steel |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
|
| 2012-01 |
Finite-element simulation of quenching incorporating improved transformation kinetics in a plain medium-carbon steel |
ACTA MATERIALIA
|
| 2011-12 |
V-Nb Microalloyed 강의 오스테나이트역에서 복합 탄질화물의 재용해 및 석출 거동 |
KOREAN JOURNAL OF METALS AND MATERIALS
|
| 2011-09 |
Fabrication of multi-level switching phase change nano-pillar device using InSe/GeSbTe stacked structure |
Current Applied Physics
|
| 2011-09 |
Dynamic Strain-Induced Ferrite Transformation during Hot Compression of Low Carbon Si-Mn Steels |
MATERIALS TRANSACTIONS
|
| 2011-08 |
Fabrication of Multilevel Switching High Density Phase Change Data Recording Using Stacked GeTe/GeSbTe Structure |
JAPANESE JOURNAL OF APPLIED PHYSICS
|
| 2011-08 |
Effect of Grain Size on Strain-Induced Martensitic Transformation Start Temperature in an Ultrafine Grained Metastable Austenitic Steel |
Metals and Materials International
|
| 2011-06 |
Microstructural Evolution and Mechanical Properties of Resistance Spot Welded Ultra High Strength Steel Containing Boron |
MATERIALS TRANSACTIONS
|
| 2011-06 |
Carbide precipitation kinetics in austenite of a Nb-Ti-V microalloyed steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2011-06 |
Fine-grained structure fabricated by strain-induced martensite and its reverse transformations in a metastable β titanium alloy |
SCRIPTA MATERIALIA
|
| 2011-03 |
Strain Hardening Behavior of High Performance FBDP, TRIP and TWIP Steels |
STEEL RESEARCH INTERNATIONAL
|
| 2011-03 |
The Relationship of Microstructure and Texture to Rolling Direction in Cold-Rolled Metastable Austenitic Steel |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2011-03 |
Effects of Si on Microstructural Evolution and Mechanical Properties of Hot-rolled Ferrite and Bainite Dual-phase Steels |
ISIJ INTERNATIONAL
|
| 2010-04 |
Amorphous-to-Crystalline Phase Transformation of Thin-Film Rubrene |
JOURNAL OF PHYSICAL CHEMISTRY B
|
| 2010-04 |
An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy X-ray diffraction |
ACTA MATERIALIA
|
| 2010-03 |
Elastic Modulus of Amorphous Ge2Sb2Te5 Thin Film Measured by Uniaxial Microtensile Test |
Electronic Materials Letters
|
| 2010-01 |
Double electrical percolation phenomenon during the crystallization of an amorphous Ge2Sb2Te5 thin film under continuous heating |
Applied Physics Letters
|
| 2010-01 |
Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe-18Mn-0.6C-1.5Al TWIP steel |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2009-12 |
Predictive Model for the Carbon Concentration Profile of Vacuum Carburized Steels with Acetylene |
Metals and Materials International
|
| 2009-12 |
Hydrogen Delayed Fracture Properties and Internal Hydrogen Behavior of a Fe-18Mn-1.5Al-0.6C TWIP Steel |
ISIJ INTERNATIONAL
|